| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE 14 SCREWS HOLDING THE BACK OF THE HANDLE.
| Screwdriver-phillips |
|
|
| 2 |
|
LIFT UP ON THE BACK OF THE HANDLE TO SEPARATE IT FROM THE FRONT OF THE HANDLE.
|
| 3 |
|
REMOVE THE 3 SCREWS HOLDING THE CONTROL BOARD.
| Screwdriver-phillips |
|
|
| 4 |
|
LIFT UP ON THE CONTROL BOARD TO LOCATE THE RIBBON CABLE. CHECK THE RIBBON CABLE FOR DAMAGE SUCH AS, BEING LOOSE, CUT OR TORN. MAKE SURE THE RIBBON CABLE IS SECURED AT BOTH ENDS.
|
| 5 |
|
IF THE RIBBON CABLE IS OKAY, REVERSE STEPS 1 THRU 4 TO REASSEMBLE THE MACHINE.
|